4. ADJUSTMENT

The monitor displays the digital input image correctly based on its pre-setting data.

4-1. Screen Adjustment

Analog Input

Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when first installing the display or whenever changing the system. For convenience, an easy set-up program installed on the utility disk to assist in the set-up procedure is provided. 

*

Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.

Adjustment Procedure

1.

Touch the Auto Adjustment Switch on the control panel.

The message appears and remains on the screen for 5 seconds. While the message is on the screen, touch the Auto Adjustment switch again to automatically adjust the clock, phase, screen position and resolution. If you do not wish to do adjust the screen, do not touch the Auto Adjustment switch again.

*

The Auto sizing function is intended for use on the Macintosh and on AT-compatible PC running Windows. It may not work properly in either of the following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The background color for the "wall paper" or "desktop" pattern is set to black.

 

If the appropriate screen cannot be made by using the Auto Adjustment switch, adjust the screen through the following procedures. If the appropriate screen can be made, proceed to step 4.

2.

Run the "Screen Adjustment Program".

Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.)

*

If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop pattern to that as shown in the diagram on the following.

3.

Adjust by using <Screen> menu in the ScreenManager.

(1)
Vertical bars appear on the screen
=>Use the <Clock> adjustment.

Select the <Clock> and eliminate the vertical bars by using the Right and Left of the Directing switches.

Do not continuously touch the Directing switches, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to <Phase> adjustment as follows.

 

(2)
Horizontal bars appear on the screen.
=>Use the <Phase> adjustment.

Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left switches.

 

*

Horizontal bars may not completely disappear from the screen depending on the PC.

 

(3)
The screen position is incorrect.
=>Use the <Position> adjustment.

The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The <Position> adjustment moves the image to the correct position.

Select <Position> and adjust the position by using the Up, Down, Right and Left switches.

If vertical bars of distortion appear after finishing the <Position> adjustment, return to <Clock> adjustment and repeat the previously explained adjustment procedure. ("Clock" => "Phase" => "Position").

 

(4)
Screen image is smaller or larger than the actual screen images.
=>Use the <Resolution> adjustment.

Adjustment is needed when the input signal resolution and the resolution now being displayed are different.

Select <Resolution> and confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using the Up and Down switches and adjust the horizontal resolution using the Right and Left switches.

 

4.

Adjust the output signal range (Dynamic Range) of the signal.
=>  
Use the <Range Adjustment> of <Screen> menu.

This controls the level of output signal range to display the whole color gradation (256 colors).

[Procedure]

Select the <Range Adjustment> in the ScreenManager and touch the Auto Adjustment switch on the control panel to adjust the Range Adjustment.
The screen blanks for a moment and adjusts the color range to display the whole color gradation of the current output signal.

 

4-2. Displaying a low resolutions.

The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the <Others> menu enables to change the screen size.

1.

Enlarge the screen size when displaying a low resolution.
=>Select the <Screen Size>.

Select the <Screen Size> in the others menu and select the screen size by using the Up and Down buttons.

Menu
Function
Full Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and the horizontal resolution are enlarged at different rates, some image may appear distorted.
Enlarged Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and horizontal resolution are enlarged at the same rates, some horizontal or vertical image may disappear.
Normal Displays the picture at the actual screen resolution.

Example: Displaying 1280 x 1024

2.

Smooth the blurred texts of the enlarged screen.
=>Switch the <Smoothing> setting.

Select the suitable level 1-5 (Soft-Sharp).
Select <Smoothing> in the <Screen> menu and adjust by using the Right and Left switches.

*
<Smoothing> is disabled when the screen is displayed in the following resolutions.
  • 1920 x 1200
  • The image size is doubled both in horizontally and vertically to (i.e. 1920 x 1200 enlarged from 960 x 600) provide clear focus which does not require this function.

3.

Set the brightness of the black area surrounding the displayed image.
=>Set the <Border Intensity>.

In the "Enlarge" mode or "Full Screen" mode, the outer area (border) is usually black.
Select <Border Intensity> in the <Others> menu and adjust by using the Right and Left switches.

4-3. Color Adjustment

Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the ScreenManager.

In the analog input, perform the <Range Adjustment> before making the color adjustments.
During color adjustments, the FineContrast mode cannot be changed. Select the mode in advance by using the Mode switch.

Adjustment Items

The adjustable items and displayed icons on the <Color> menu depend on the selected FineContrast mode.

 

"*": Settable/Adjustable "-": Fixed at the factory
Icons
Functions
FineContrast Modes
Custom
sRGB
EMU
CAL
Brightness**
*
*
-
-
Temperature**
*
-
-
-
Gamma**

*

-

-
-
Saturation
*
-
-
-
Hue
*
-
-
-
Gain

*

-

-
-
6 colors
*
-
-
-
Reset
*
-
-
-
**These settings can be also adjusted on the FineContrast menu. 
*
Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm Up for at least 20 minutes before making adjustments.)
*
Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the default settings.
*
The values shown in percentages represent the current level within the specific adjustment. They are available only as a reference tool. (To create a uniform white or black screen, the percentages for each will probably not be the same.)

 

Adjustment Contents

Menu
Function Descriptions
Adjustable Range
Brightness

To set the brightness of the screen 0 ~ 100%
Temperature

To set the color temperature 4,000 ~ 10,000 K
in 500 K increments (including 9,300 K). Default setting is 5000K
*
The values shown in the Kelvin are available only as a reference tool.
*
Adjusting the <Gain> turns the <Temperature> adjustment "OFF".
*
Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF".)

Gamma

To set the gamma value 1.8 ~ 2.6 (in 0.2 increments)
*
If setting the gamma value, the using the monitor in the digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma value from 1.8 to 2.2.
Saturation

To change the saturation -100 ~ 100
Setting the minimum level (-100) turns the image to the monochrome.
*
The <Saturation> adjustment may cause undisplayable color tone.
Hue

To change the flesh color, etc. -100 ~ 100
*
The <Hue> adjustment may cause undisplayable color tone.
Gain

To change each color (red, green and blue) 0 ~ 100%
By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>.
*
The values shown in the percentage are available only as a reference tool.
*
Setting the <Temperature> invalidates the <Gain> adjustment. <Gain> setting returns to the default setting.
6 colors

To adjust <Saturation> and <Hue> in each color (Red, Yellow, Green, Cyan, Blue and Magenta) Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset

To return the color settings of the selected mode to the default settings Select the <Reset>.

 

4-4. Power-save Setup

The <PowerManager> menu in the ScreenManager enables to set the power-save setup.

 

*

Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely.
*
Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the Upstream and the Downstream ports). Therefore, power consumption of the monitor will change according to the connected devices even if the monitor is in a power saving mode.

 

Analog Input

This monitor complies with the "VESA DPMS" standard.

To use the PC's Power Saving System (VESA DPMS).
[Procedure]
(1)
Set the PC's power saving settings.
(2)
Select "VESA DPMS" in the <PowerManager> menu.
[Power saving system]
PC
Monitor
Indicator lamp
ON
Power Save
Operation
Operation
Light
Off
Power saving
STAND-BY
SUSPEND OFF
Power saving
Off
Light
[Power Resumption Procedure]

Operate the mouse or keyboard to return to a normal screen.

Digital Input

This monitor complies with the "DVI DMPM".

[Procedure]
(1)
Set the PC's power saving settings.
(2)
Select "DVI DMPM" from the <PowerManager> menu.
[Power saving system]
PC
Monitor
Indicator lamp
ON
Power Save
Operation
Operation
Light
Off
Power saving
Power saving
Off
Light
[Power Resumption Procedure]

Operate the mouse or keyboard to return to a normal screen .